Are Vinyl Stickers Waterproof? Choosing the Right Sticker Material

Yes, vinyl as a material is water-resistant to waterproof, which is why it is the go-to for bottles, cars and outdoor gear. How long a vinyl sticker actually lasts depends on the ink, the adhesive, whether it is laminated and how you wash it.

Key takeaways

  • Vinyl and other plastic films handle water far better than paper stickers.
  • The ink and any laminate matter as much as the vinyl itself.
  • Cast vinyl is rated for longer outdoor life than calendered vinyl.
  • Treat "dishwasher safe" as a specific product claim, not a given.
  • Hand wash stickered bottles and cups, and keep pressure washers off the edges.

Short answer: yes, vinyl is a water-resistant to waterproof material, so a vinyl sticker can handle rain, splashes and a rinse under the tap. But "waterproof" describes the film, not the whole sticker. The ink printed on it, the adhesive behind it, whether a clear laminate sits on top, and how you wash it all decide whether that sticker still looks good a year from now.

Below: sticker materials, lamination, dishwasher claims, outdoor life, and care for bottles, cups and cars.

Waterproof vs water-resistant: what the words mean

Label makers use these two terms differently. Avery's guide to waterproof vs water-resistant labels says water-resistant labels work for light moisture like splashes or refrigeration, while waterproof labels handle full exposure, including submersion, ice and outdoor conditions. Avery says it tests its waterproof labels by fully submerging labeled products in water for at least seven days.

Avery's help article on water-resistant and waterproof materials puts it simply: water-resistant labels can take some splashing without smearing but cannot be submerged, and waterproof labels can be submerged and not smear.

That same article makes a point most people miss: the ink counts too. Avery notes that one of its white film labels is waterproof when printed with a pigment-based inkjet or laser printer, but only water-resistant to accidental splashes when printed with a standard dye-based inkjet printer. Same film, different result, all because of the ink.

Sticker materials compared

Most stickers are made from one of three families of material: paper, vinyl (PVC film), or another plastic film such as polypropylene (BOPP) or polyester.

Paper

Paper stickers are inexpensive, but Avery's comparison of film, paper and vinyl labels says paper labels "aren't the best fit for heavy moisture or extreme wear." The same article notes that laminates and varnishes can add some protection to paper. Paper suits packaging and indoor use, not water bottles.

Vinyl

Avery describes vinyl as "generally designed for more extreme durability, outdoor exposure, and long-term wear," and calls it the better choice for harsh environments, equipment and outdoor use. That is why vinyl is the default for car decals, laptop stickers, tumblers and anything that lives outside.

BOPP and other films

Avery describes film labels in general as ranging "from water-resistant to waterproof." Its guide to BOPP labels says BOPP (biaxially oriented polypropylene) is popular in the food industry for its waterproof and moisture-resistant properties and resists oils from products and hands.

MaterialWaterSun / outdoorsDishwasherTypical use
PaperNot suited to heavy moistureIndoor useNot recommendedPackaging, envelopes, indoor labels
Paper with laminate or varnishSome added protectionLimitedNot recommendedProduct labels kept mostly dry
BOPP / plastic filmWater-resistant to waterproofVaries by productOnly if the maker says soBottles, jars, food and cosmetic labels
Calendered vinylWaterproof filmRated in years outdoorsOnly if the maker says soSigns, windows, flat decals
Cast vinylWaterproof filmLonger outdoor ratingsOnly if the maker says soCurved or riveted surfaces, longer outdoor use
Any film + overlaminateWaterproof film, sealed printAdded UV protectionOnly if the maker says soPrinted stickers for bottles, cars, outdoor gear
General guide based on manufacturer descriptions cited in this article. Always check the specific product's data sheet.

Calendered vs cast vinyl

Vinyl comes in two main grades, and the difference shows up outdoors.

Calendered vinyl: ORAFOL's ORACAL 651, an intermediate calendered film, is a 2.5-mil film with a permanent solvent-based adhesive, rated for 6 years outdoors for colors (4 years for metallics) on vertical surfaces in ORAFOL's mildest climate zone.

Cast vinyl: ORAFOL's ORACAL 751C high performance cast is a 2-mil film rated for 8 years outdoors in black and white and 7 years in colors under the same conditions. ORAFOL's product page for the region also highlights its dimensional stability on corrugations and rivets, a good sign for curved or textured surfaces.

Two cautions. First, ORAFOL's ratings are for vertical exposure in its mildest climate zone, so expect different results on horizontal surfaces or in harsher sun. Second, a printed sticker is vinyl plus ink, so the print needs protecting too. That is where lamination comes in.

What lamination adds

A laminate (often called an overlaminate) is a clear film applied over the printed sticker. It seals the ink so water, hands and UV light hit the laminate first.

Avery Dennison says its overlaminate films provide durability and color longevity for printed vinyl, and describes its DOL Max series as protecting against UV, extreme temperatures, high humidity and salt spray. Avery's film vs paper guide adds that film labels can be paired with protective laminate coatings for more resistance to scuffing, moisture and everyday wear.

For a sticker that gets handled every day, like a water bottle or phone case sticker, or one that lives outside, ask for a laminate.

Are vinyl stickers dishwasher safe?

Manufacturers treat dishwasher safety as a specific product claim. Avery's dishwasher safe labels help page lists particular products it calls dishwasher safe and recommends its waterproof label line for printable dishwasher-safe use. In other words, a label is dishwasher safe because its maker says so, not just because it is waterproof.

Our advice: unless the sticker's maker specifically says dishwasher safe, hand wash anything with a sticker on it.

How to care for stickers on water bottles and cups

These habits help any vinyl sticker last longer on drinkware:

  1. Clean before you stick: Wash and fully dry the bottle so the adhesive grabs the surface, not dust or oil.
  2. Let it settle: Give the sticker time before washing. Avery Dennison's cleaning bulletin for graphics says its films should not be washed within the first 48 hours after application.
  3. Hand wash: Use warm water, mild soap and a soft sponge.
  4. Skip harsh cleaners: The same bulletin warns that solvents and abrasive cleaning agents may damage decals.
  5. Go easy on the edges: Don't pick at or scrub the sticker's edges, since lifted edges let water underneath.
  6. Don't soak: Avoid leaving stickered cups to soak in hot water for long periods unless the sticker is rated for it.

Do vinyl decals survive car washes?

Yes, vinyl decals and wraps are designed to be washed, but pressure and angle matter. Avery Dennison's cleaning and maintenance bulletin allows high-pressure cleaning of its graphics under these conditions:

  • Maximum pressure of 1,200 psi (80 bar)
  • Maximum water temperature of 158°F (70°C)
  • Nozzle at least 30 inches (75 cm) from the graphic, aimed straight on, not angled

The bulletin warns that sharp, angled jets can damage the edges of graphics and cause them to lift, and that high-pressure steam should not be used because the heat can weaken the adhesive. If you use a self-serve wand, keep it back and never aim it at a decal's edge. Those numbers come from one manufacturer, so check the care sheet for your specific film.

When it is time for a decal to come off, see our guide on how to remove car decals without damaging paint.

How to order stickers that hold up

When you request custom stickers from any print shop, give them the details that decide the material:

  • Where the sticker will go (bottle, cooler, car window, laptop, outdoor sign)
  • Whether it will be washed, and how (hand wash, dishwasher, car wash)
  • Whether it will sit in direct sun
  • The surface shape (flat, gently curved, tightly curved, textured)

Also think about the cut. Our guide to die cut vs kiss cut stickers explains how the shape and backing affect how a sticker looks and peels.

At Vinyl Cutz in Salinas we make decals and stickers in-house. Send your design and tell us how the stickers will be used, and we'll confirm the material and finish in your quote.

Frequently asked questions

Are vinyl stickers dishwasher safe?

Not automatically. Vinyl film handles water, but a dishwasher cycle is much harsher than a rinse. Manufacturers such as Avery name specific products as dishwasher safe, so treat it as a product-specific claim. If the sticker maker does not say "dishwasher safe," hand wash the bottle or cup with mild soap and a soft sponge.

How long do vinyl stickers last outdoors?

It depends on the vinyl grade, the ink and the exposure. ORAFOL rates its calendered ORACAL 651 at 6 years for colors and its cast ORACAL 751C at 7 years for colors, both on vertical surfaces in a mild climate. Results differ on horizontal surfaces, in harsher sun and with printed inks. A UV-protective laminate helps printed colors last longer.

What is the difference between laminated and unlaminated stickers?

An unlaminated sticker has its printed ink on the surface, exposed to rubbing, scratches and sunlight. A laminated sticker has a clear film over the print that seals the ink. Avery Dennison says overlaminates protect printed vinyl against UV, humidity and abrasion. For stickers that are handled often or live outdoors, laminated is the safer choice.

Are vinyl stickers waterproof on water bottles?

Vinyl film itself is waterproof, so a vinyl sticker can handle rinsing and condensation on a bottle. How long it lasts depends on the ink, adhesive and any laminate. Apply it to a clean, dry bottle, wait before the first wash (Avery Dennison advises 48 hours for its films), hand wash, and avoid scrubbing the edges.

Do vinyl decals survive car washes?

Yes, when the wash is gentle on the edges. Avery Dennison allows pressure washing of its graphics at up to 1,200 psi with the nozzle at least 30 inches away and aimed straight on, and warns that angled jets can lift edges. Avoid high-pressure steam. Wait at least 48 hours after a new decal goes on before washing.

Written by

We print, press and stitch custom apparel, decals and DTF transfers in-house at 838 S Main St, Suite B, Salinas, CA. Questions? Call or text (831) 540-0287.