Key takeaways
- A gang sheet is one 22-inch-wide DTF film printed with many designs, priced by sheet size.
- Upload transparent PNGs at the exact size you will press, at 300 DPI.
- Suppliers recommend 1/4 inch to 1 inch of space between designs so you can cut them apart.
- Cost per design drops as you fit more designs on the sheet.
- Bigger sheets cost less per square inch, but the drop is not perfectly even from size to size.
A DTF gang sheet is a single sheet of direct-to-film (DTF) transfer film, 22 inches wide, printed with many designs at once. Instead of paying for each transfer one by one, you fill the sheet with logos, names, pocket prints and full-front graphics, then cut them apart and press them. The more you fit on the sheet, the less each design costs.
Below: sheet sizes and prices, file setup, spacing, and the math for what each transfer really costs.
What a gang sheet is and why it saves money
With a gang sheet, all of your designs are printed together on one piece of film. Heat transfer supplier Stahls' describes the same idea in its UltraColour MAX artwork specifications: you can upload one file with multiple images included, and the transfers ship on a roll, not cut apart. Plan on trimming each design yourself before pressing.
Gang sheets save money for one simple reason: the price is set by the size of the sheet, not by how many designs are on it. A 22 x 30 sheet with 5 designs on it costs the same as a 22 x 30 sheet with 35. Stahls' also notes in its DTF artwork tips that one order can mix youth and adult sizes, or fill a sheet with different names and numbers for uniforms.

Gang sheet sizes and price per square inch
Our gang sheets are all 22 inches wide. You choose the length. To compare sizes fairly, divide the price by the sheet's area. A 22 x 30 sheet, for example, is 22 times 30, or 660 square inches.
| Sheet size (inches) | Price (USD) | Area (sq in) | Price per sq in |
|---|---|---|---|
| 22 x 30 | $18.50 | 660 | $0.0280 (2.80 cents) |
| 22 x 40 | $22.50 | 880 | $0.0256 (2.56 cents) |
| 22 x 50 | $28.50 | 1,100 | $0.0259 (2.59 cents) |
| 22 x 60 | $36.50 | 1,320 | $0.0277 (2.77 cents) |
| 22 x 70 | $40.50 | 1,540 | $0.0263 (2.63 cents) |
| 22 x 80 | $45.50 | 1,760 | $0.0259 (2.59 cents) |
| 22 x 100 | $55.50 | 2,200 | $0.0252 (2.52 cents) |
The 22 x 100 has the lowest cost per square inch and the 22 x 30 the highest, but the sizes in between do not drop evenly: the 22 x 40 beats the 22 x 50 and 22 x 60. Pick the smallest sheet that holds your order, then check whether the next size up adds room for extras at a better rate.
How to set up your artwork
Good transfers start with good files. Prepare these before you open a builder.
- File type: A PNG with a transparent background. Stahls' artwork specs list this as the preferred raster format.
- Resolution: 300 DPI. Stahls' recommends 300 DPI with the artwork set at actual size; its specs call 150 DPI the minimum, with lower quality.
- Size: Upload each design at the exact size you will press it, not a full front you plan to shrink later.
- No background boxes: Stahls' specs warn that background rectangles representing the garment color will be printed.
- Hard edges: Soft edges such as drop shadows and fades cannot be printed as is, per the same specs.
- Thin lines: Stahls' sets 0.018 inch as the minimum line thickness for its DTF film; thinner lines may not print.
If your logo is a JPG with a white box around it, the builder can remove backgrounds and lets you compare the "Original" and "AI clean" versions before you commit. Our free background removal guide walks through it step by step.
How much space to leave between designs
You need a gap between designs to cut them apart without clipping an edge. Suppliers publish different minimums:
- DTF Transfers Now recommends at least 0.25 inch between all designs and at least 0.25 inch at the edges.
- Ninja Transfers recommends a minimum of 1 inch between designs (a 1/2 inch margin around each), and says gaps over 2 inches are wasted material.
A practical range is 1/4 inch to 1 inch. Leave more room if you cut by hand or your designs have odd shapes with thin points. If you are not sure what works for your order, ask us before you finalize the sheet.
How many designs fit on a sheet
It depends on design size and spacing. Two worked examples, using a 1/4-inch margin at the sheet edges, leaving 21.5 inches of usable width:
Example 1: 3.5-inch left chest logos on a 22 x 30 sheet.
- Across: 5 logos at 3.5 inches plus four 0.5-inch gaps is 19.5 inches, which fits in 21.5. Six would need 23.5 inches.
- Down: 7 rows at 3.5 inches plus six 0.5-inch gaps is 27.5 inches, which fits in the 29.5 usable inches.
- Total: 5 x 7 = 35 logos. At $18.50, that is about 53 cents per logo.
- With 1-inch gaps instead: 5 across and 6 down is 30 logos, or about 62 cents each.
Example 2: full-front designs. A common adult full-front size is 11 x 11 inches, per the Stahls' design size and placement guide, but two 11-inch designs plus any gap will not fit across a 22-inch sheet. Size them to 10.5 inches wide with 0.5-inch gaps (or 10 inches with 1-inch gaps) and you get two across. On a 22 x 60 sheet, five rows of 10.5 x 10.5-inch designs fit, which is 10 full fronts for $36.50, or $3.65 each.
A quarter inch here and there decides whether a whole column fits, so tuck small designs like pocket logos or sleeve prints into leftover space. Our DTF transfer size chart lists typical sizes for each placement so you can plan the layout before you upload.

How to build a gang sheet in our builder
Gang sheets are ordered online at the DTF gang sheet builder. The basic flow:
- Pick a size: Choose your sheet length, from 22 x 30 up to 22 x 100.
- Upload: Add individual designs, or upload a finished sheet you laid out yourself.
- Arrange: Place designs yourself, or use auto layout to arrange them for you.
- Clean up: Remove backgrounds if needed, and apply halftones or Knockout.
- Review: Check every design for size, spelling and edges.
- Add to cart: Choose local pickup at our Salinas shop or shipping at checkout.
Watch the free gang sheet builder video guide to see each step. When your transfers arrive, our guide on how to apply DTF transfers covers pressing them.
Fill the sheet, lower the cost
A gang sheet shares one price across every design on it, so the fuller the sheet, the cheaper each transfer. Vinyl Cutz makes DTF transfers in-house in Salinas, so you can pick up your order at 838 S Main St, Suite B, or have it shipped. Same-day service may be available depending on order volume and cutoff time. Questions about your layout? Call or text (831) 540-0287.
Frequently asked questions
What is a gang sheet?
A gang sheet is one sheet of DTF transfer film printed with several designs at once. You arrange logos, names and graphics on the sheet, it is printed as a single piece, and then you cut the designs apart and heat press each one onto a garment. Because the price is set by the sheet size, packing more designs onto it lowers the cost of each transfer.
What size is a DTF gang sheet?
Our gang sheets are 22 inches wide. You choose the length: 30, 40, 50, 60, 70, 80 or 100 inches. Prices run from $18.50 for a 22 x 30 sheet to $55.50 for a 22 x 100 sheet. The 22-inch width means two designs can sit side by side only if their combined width, plus spacing and edge margins, stays under 22 inches.
How many designs fit on a gang sheet?
It depends on design size and spacing. As a worked example, 3.5-inch square logos with half-inch gaps and quarter-inch edge margins fit 5 across and 7 down on a 22 x 30 sheet, for 35 logos. Two full-front designs fit side by side only if each is about 10.5 inches wide or less. Measure your designs at print size, then do the math before you order.
What file format and resolution do I need?
Use a PNG with a transparent background, at 300 DPI, uploaded at the exact size you will press it. Avoid background boxes, because anything in the file prints. Avoid soft shadows and very thin lines, which may not transfer. If your file has a white background, the builder can remove it, and you can compare the original and cleaned versions before ordering.
How much space should I leave between designs?
Suppliers publish different minimums, from about 1/4 inch to 1 inch between designs. Use the larger gap if you cut by hand or your designs have irregular shapes, and a smaller gap for simple shapes or machine cutting. Gaps much bigger than that waste film you are paying for. If you are unsure, ask us to look at your layout before you order.
Is a gang sheet cheaper than individual transfers?
Usually, yes, for orders with more than a few designs. You pay one price for the whole sheet, so every design you add lowers the cost per transfer. For example, 35 small logos on a $18.50 sheet work out to about 53 cents each. The savings depend on how well you fill the sheet, so add spares or small extras to use empty space.


